- Lifetime product warranty - if it ever fails, for ANY reason, we will replace it with a brand new one. Hassle free. No fine print. We pay for the shipping too.
- Engineered and made in the USA with the best quality components in the industry
- Catastrophic protection - Patented 3-Stage industrial AC surge protection
- Protection from disruption/data loss/errors - Industrial EMI/RFI noise filtering
ESP Compact surge protectors provide industrial-grade surge protection and noise filtering in a small, single-outlet package. The price point is comparable to what you would pay for "consumer-level" products in a retail store. But the performance is pro level and pure ESP!
Most low cost consumer surge protectors and "power strips" use single-stage MOV technology which offer very limited protection against surges and no protection against noise. By comparison, the ESP Compact products provide professional multi-stage protection - both surge and noise. Just like its big brothers - the Digital QC, Next Gen, and enVison models, the Compact uses a combination of gas tube, silicone avalanche diodes and metal oxide varistors to provide incredibly robust performance.
Like all ESP products, the Compact series is Made in the USA.
Because of its small size, the Compact series can be easily installed where there is limited space. Models are available with Cat5e ETL verified network surge and/or telephone line protection to ensure trouble-free connections and maximum signal integrity. ESP Compact devices protect equipment from high speed transients, lightning strikes, wiring faults, and electronic noise events that can cause damage, data loss, and downtime.
There are four models available:
MFP-1 has RJ-45 Ethernet protection on the bottom of the unit and RJ-11 phone protection on the face.
MFP-2 has RJ-11 phone protection on the face. No Ethernet protection.
MFP-4 has RJ-45 Ethernet protection on the bottom of the unit. No phone protection.
AC-1 has no phone or Ethernet protection.
Physical Characteristics
Dimensions - Length: 6.25"
Dimensions - Width: 3.5"
Dimensions - Height: 1.625"
Shipping Weight: 1.8 lbs
Input Connection - AC 3' cord
Output Connection - (1) NEMA 5-15R Flush Receptacle
Temperature Range: 5C to 35C
Humidity Range: 5% to 95% R.H. Non-Condensing
Electrical Characteristics
Maximum Line Voltage: 140 VAC
Maxium Load Current: 15 Amps Continuous
Operational Status Green Light = Power On
Leakage Current: <0.5 mA Leakage Current
Steady State Efficiency: >99.6% @ Full Load
Thru-put Resistance: <0.020 Ohms (Each Line)
Voltage Suppression
Response Time: < 25 nS
Sine Wave Tracking: Yes
Residual Energy Let-thru in Joules (Less is Better)
-All Modes IEEE C62.41 Category A Ringwave: 0.09 Joules
-All Modes IEEE C62.41 Category B Ringwave: 0.19 Joules
-All Modes IEEE C62.41 Category B Impulse: 1.06 Joules
-All Modes UL 1449 Impulse: 0.13 Joules
Total Residual Energy Let-thru All Modes: 1.46 Joules
Suppressed Voltage Rating: 330V L-G, 330V N-G, 400V L-N
Noise Frequency Attenuation
Response Time - Series Filter: Instantaneous
Normal Mode
>20 dB (10 times Reduction Factor): 25 kHz - 30 MHz
>30 dB (31.6 times Reduction Factor): 100 kHz - 50 Mhz
>40 dB (100 times Reduction Factor): 210 kHz-1 Mhz, 3 MHz-21 MHz
Filter Order: 2nd
Common Mode
>10 dB: 1.5MHz - 50MHz
>20 dB (10 times Reduction Factor): 3 MHz - 30 MHz
>30 dB (31.6 times Reduction Factor): 5.5 MHz - 30 MHz
Sine Wave Tracking: Yes
Telephone Line Suppression (Only For Models: MFP-1, MFP-2)
Connections: RJ-11 In/Out
Thru-Put Resistance: 14 Ohms
Response Time: < 25 nS
Clamp Voltage FCC Part 68 Metallic Waveform: 329 Volts
Clamp Voltage FCC Part 68 Longitudinal Waveform: 347 Volts
Maximum Surge Current Withstand for 160 μS: 200 Amps
Residual Energy Let-Thru in Joules: 16.4 Joules
DSL Filter: Yes
Fuses: Automatically Resetting
Ethernet Network Protection (Only For Models: MFP-1, MFP-4)
ETL Verified Cat 5e Performance: ANSI/TIA-568-B.2 Cat. 5e
Ethernet Data Transmission: Cat 5e 10/100/1000 Base Tx
Connections: RJ-45 In/Out
Protected Lines: All (8)
Clamp Voltage: 8 V POE compatible
Peak Pulse Power: 1.5 kW
Response Time: <1 Pico Second
Approval Standards
Exceeds ANSI/IEEE C62.41 Catergory A&B: >1000 hits Withstands FCC Part 68 Surge Standard: >1000 hits Complies with UL 1283 EMI Filter Standard: Yes, Full EMI Filter Safety Certified: ETL Certified to UL 1449 3rd Edition & CSA 22.2 No. 8
