Today's Digital QC is the evolution of the original, ground-breaking ESP design which came to market in the 1980s. To this day it remains one of the best selling professional-grade surge protectors in the world - having sold millions of units. It offers very powerful protection but without the advanced monitoring and diagnostic capability of the Next Gen and enVision products.
Unlike standard surge protectors and power strips that use only metal oxide varistors (MOV), the Digital QC combines gas tubes, silicone avalanche diodes and metal oxide varistors into a patented circuit that does not degrade over time and provides very robust protection.
Like all ESP products, the Digital QC is proudly made in the USA with the highest quality components.
The Digital QC offers comprehensive power protection to safeguard equipment from the dangers associated with damaging surges, spikes, over voltage, EMI/RFI noise and wiring faults.
The Digital QC is available in a variety of voltage/amperage configurations. Many models also have Cat5e ETL verified network (RJ-45) and telephone line (RJ-11) surge protection to protect network interface circuits. The D5 series also includes power over Ethernet protection.
Note: plug and outlet types as well as phone/network connections will vary from model to model. The product images may not illustrate the exact configurations.
Dimensions - Length: 8.8"
Dimensions - Width: 6.25"
Dimensions - Height: 2.2"
Shipping Weight: 3.4 lbs
Input Connection: AC 3' cord with 6-20P plug
Flexible Output Connection: 6 inch "pigtail" cord with (1) 6-20R outlet
Maximum Line Voltage: 240VAC
Maximum Load Current: 20A
Leakage Current: <3.5 mA
Steady State Efficiency: >99.2% @ 20A
Thru-put Resistance: <0.030 Ohm
Patented Hybrid Circuitry: Yes
Response Time: < 25 nS
Sine Wave Tracking: Yes
Clamp Voltage 6kV 3kA - Normal Mode: 695V peak
Clamp Voltage 6kV 3kA - Common Mode: 495V peak (L1-G)
Clamp Voltage 6kV 3kA - Common Mode: 495V peak (L2-G)
Maximum Surge Current Withstand for 20 μsec: 19500A peak
Residual Energy Let-thru in Joules (less is better)
-All Modes IEEE C62.41 Category A Ringwave: 0.33J
-All Modes IEEE C62.41 Category B Ringwave: 0.33J
-All Modes IEEE C62.41 Category B Impulse: 2.44J
-All Modes UL 1449 Impulse: 0.43J
--Total Residual Energy Let-thru All Modes: 3.53J
Lowest UL 1449 Rating: 600V
>10 dB (3.16 times Reduction Factor): 5 kHz - 30 MHz
>20 dB (10 times Reduction Factor): 45 kHz - 30 MHz
>30 dB (31.6 times Reduction Factor): 55 kHz - 30 MHz
>40 dB (100 times Reduction Factor): 70 kHz - 3.5 MHz
Filter Order: 2nd
>10 dB (3.16 times Reduction Factor): 30 kHz - >30 MHz
>20 dB (10 times Reduction Factor): 70 kHz - >30 MHz
>30 dB (31.6 times Reduction Factor): 140 kHz - > 30 MHz
>40 dB (100 times Reduction Factor): 220 MHz - 16 MHz
Filter Order: 3rd
Sine Wave Tracking: yes
Connections: RJ-11 in/out
Thru-put Resistance: 14 ohms
Response Time: < 25 nS
Clamp Voltage FCC Part 68 Metallic Waveform: 329V
Clamp Voltage FCC Part 68 Longitudinal Waveform: 347V
Maximum Surge Current Withstand for 160 μsec: 200A
Residual Energy Let-thru in Joules
-All Modes FCC Part 68 Longitudinal Waveform (less is better): 3.6J
Network Connections: RJ-45 in/out
Protected Lines: all
Clamp Voltage: 8V
Peak Pulse Power: 1.5kW
Response Time: <1 Pico Second
Ethernet Data Transmission: Cat 5e 10/100/1000 Base Tx
Best UL 1449 Rating in the Industry: 600 V
Exceeds ANSI/IEEE C62.41 Catergory A&B: >10000 hits
Withstands FCC Part 68 Surge Standard: Yes
Complies with UL 497A & B Standards: Yes
Complies with UL 498 Plug & Receptacles: Yes
Complies with UL 991 Reliabilty Standard: N/A
Complies with UL 1283 EMI Filter Standard Full EMI filter
Safety Certified: UL-1449 Standard, ETL Listed
$ 105.95 $ 134.00
IN STOCK - ships in 2-3 business days Industrial-grade surge and noise protection: protect sensitive electronics from lightning strikes, surges, transients, noise and over voltage events. 120 volt / 20 amp with (1) 5-20R & (1) 5-15R outlet Professional protection...View full product details